What is the difference between slotting and die cutting of flex carton box printing machine?
The question seems very simple, as if everyone understands it. But for customers who are preparing to build a new carton factory, it is very difficult to choose the machine. They don’t know the difference and what to choose.So, for this situation, I would…[Читать далее]

POLYRESIN PRODUCTS
The raw material of polyresin products is synthetic resin, and the mold is made of silicone. The mold cost is relatively cheap and can be produced in small quantities. Because the material of the silicone mold is very soft, the design development space is quite large. The resin material is close to ceramics. High hardness and…[Читать далее]

Car Battery Replacement & Its Benefits

A battery gives life to any vehicle, your car needs battery power to start its engine. A car battery also used in stabilizing, filtering and giving the needed power for ignition. It provides the jolt of electricity necessary to power all the electrical components in your vehicle.

There are several factors…[Читать далее]

Functions And Advantages of Thin-walled Stainless Steel Pipe/tube
Stainless steel pipe/tube has high strength, strong corrosion resistance, good toughness, excellent vibration and shock resistance, and it is not brittle at low temperature. In the process of water delivery, it can ensure the purity of water quality.

Thin-walled stainless steel…[Читать далее]

Fiberglass Mesh
Fiberglass mesh is cheap material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the corners of…[Читать далее]

The Inductor
An Inductor is a passive electrical component consisting of a coil of wire which is designed to take advantage of the relationship between magentism and electricity as a result of an electric current passing through the coil.

In our tutorials about Electromagnetism we saw that when an electrical current flows through a wire…[Читать далее]

Discover The Many Perks Of Polyethylene Films: Production, Types and Uses
As much as we love stepping out and breathing in the fresh air, fact remains that it is not just revitalizing oxygen in the air. It also contains specks of dust, spoilage bacteria, humidity and other unwarranted particles. While our bodies are trained to survive and thrive…[Читать далее]

Chain Blocks or Come Alongs?How do them work?
Chain blocks are portable devices used to manually lift or lower a load. A hand-operated chain hoist is usually smaller and more compact compared to an electric hoist of the same size. Chain blocks are able to lift in a vertical position only. If they are side loaded or used horizontally it is possible…[Читать далее]

What is Snowplow? Is it Useful?
The winter season brings with it a sense of magic with snowfall, trees covered with fluffy, white snow, cozy evenings in front of the fireplace with your loved ones and fun time playing in the snow for kids. But as an adult, winter also brings a sense of dread because snowfall means snow clearance responsibilities…[Читать далее]

For years, healthcare professionals have been stepping inside the operation room wearing surgical hats or caps or sometimes called scrub hats or scrub caps. Surgical hats are used to cover and hold back the hair during medical procedures. Alike hand gloves, scrub hats aid in keeping the operation room disinfected and the surgery sites free from…[Читать далее]

Hourglass, also called sand timer hourglass, a device for measuring time. In its usual form it consists of two cone-shaped or oval glass receptacles joined by a narrow neck. Sand or a liquid (such as water or mercury) in the uppermost section of a true hourglass will run through the neck into the lower section in exactly one hour. By turning the…[Читать далее]

Polyimide film, also called polyimide film, is a kind of thin-film insulating material. It is mainly made of pyromellitic dianhydride (PMDA) and diaminodiphenyl ether (DDE) in a strong polar solvent through polycondensation and casting to form a film and then imidization. Polyimide film generally appears yellow, but now it can be made into various…[Читать далее]

The demand for disposable paper products like plates, cups, and other containers have reached an all-time high ever since the ban on plastic products came into force. The most important factor that has driven the paper products industry is the eco-friendly nature of such products. The use and throw nature of these products helps in sustaining…[Читать далее]

Active Pharmaceutical Ingredient (API) is the biologically active component of a drug product (tablet, capsule, cream, injectable) that produces the intended effects. APIs including biological API and intermediate API find application in high quality drugs that treat diseases pertaining to oncology, cardiology, CNS and neurology, orthopaedic,…[Читать далее]

A flow meter is an instrument that indicates the flow rate being measured and/or the total amount of fluid over a selected time interval. Simply put, it is an instrument used to measure the flow of fluid in a pipe or open channel.

Regarding the principle of the flow meter, one is more difficult to understand. How does it work?

1. It relies on…[Читать далее]

Your Home Slippers Can Boost Your Health

Do you avoid wearing slippers at home? After reading this, you will change your mind and consider donning them all the time!

In many Indian households, people don’t actually wear slippers at home, mostly due to their religious beliefs. There are also others, who prefer not wearing slippers in the house f…[Читать далее]

Cosmetic Bottles – Reasons to Use Bottles for Cosmetics
Cosmetic bottles are a fantastic way to display and market your cosmetic products, but what benefits are there to using bottles instead of other forms of packaging?

Here at Fillcon, we have been working within the cosmetic packaging, bottle filling and sample sachet production industry for y…[Читать далее]